Sacred Artifact Lv

Transient card properties
Stats Card ID Cost Lv Skill Lv HP ATK Limit Break Sacred Artifact Lv Stat plus
Rarities 1-star 2-star 3-star 4-star 5-star
Attributes All-Round Fire Water Wood Aether Nether Infernal Valiant World Infinity Null
Weapon Types Slash Thrust Blow Shot Magic Snipe Long Slash None All

Sacred Artifact Level, also referred as Sacred Artifact Lv, S.A.Lv, SALV, SALv, and historically referred to as jingi among fans, is a card property that determines a damage multiplier applied in the card's Charge Attack.

Sacred Artifact Level Up

A card's SALv will increase if a duplicate of that card is obtained. Cards (and thus duplicates of cards) are typically obtained through Transient Summons; however, certain cards may be obtained as quest completion rewards, exchangeable goods in Item Exchanges, or through increasing Guild Rank in the case of the Protagonist. The maximum SALv a card may have is 100; however, a card may reach an effective limit before this due to limited availability of duplicates, such as with the Protagonist limited by the maximum Guild Rank, and Lantern acquisition during I Ain't Scared a No Halloween! (2018 Re-Release).

Charge Attack damage multiplier calculation

The Charge Attack damage multiplier reaches a maximum value of 2 at SALv100; however, it does not scale linearly. The calculation is designed so that the multiplier is 1.5 at SALv10. The calculation is as follows:

SALv-Dependent Damage Multiplier = (1 + 0.5×log₁₀SALv)

This value is multiplied with the intrinsic Charge Attack multiplier (closely predicted by Rarity) to produce the final Charge Attack multiplier.

Effect on Charge Skill

The SALv acts as the effective Skill Level for the Charge Skill. It directly corresponds to the level of any statuses it bestows or inflicts. For example, a charge skill of SALv41 bestowing Blessing will bestow a Lv41 Blessing status. It also linearly corresponds to any HP- or CP-depleting and restoring/increasing effects. If the points (HP or CP) added/subtracted at SALv100 is represented as Points_SALV100, then the calculation for the exact value of the effect at a given SALv is listed below:

Points changed = (Points_SALV100/2)×(1 + (SALv/100))